manualshive.com logo in svg

Honda Forza 300 2013, Руководство пользователя, Страница: 16 / 119

Поделиться
Скачать
Honda Forza 300 2013 Скачать руководство пользователя страница 16

Riding Precautions

13

continued

Sc

oot

er

 Saf

et

y

❙

Combined ABS (Anti-lock Brake System) 
(NSS300A only)

This model is also equipped with an Anti-lock 
Brake System (ABS) designed to help prevent 
the brakes from locking up during hard braking. 
Always use the recommended tyres to ensure 
correct ABS operation.

●

ABS does not reduce braking distance. In 
certain circumstances, ABS may result in a 
longer stopping distance.

●

ABS does not function at speeds below 10 
km/h (6 mph).

●

The brake lever and pedal may recoil slightly 
when applying the brakes. This is normal.

❙

Wet or Rainy Conditions

Road surfaces are slippery when wet, and wet 
brakes further reduce braking efficiency.
Exercise extra caution when braking in wet 
conditions.
If the brakes get wet, apply the brakes while 
riding at low speed to help them dry.

●

Park on a firm, level surface.

●

If you must park on a slight incline or loose 
surface, park so that the scooter cannot 
move or fall over.

●

Make sure that high-temperature parts 
cannot come into contact with flammable 
materials.

●

Do not touch the engine, muffler, brakes and 
other high-temperature parts until they cool 
down.

Parking

Содержание Forza 300 2013
























































































































Отзывы:

Нет отзывов