Honda Forza 300 2013 Скачать руководство пользователя страница 18

Страница: 18 / 119

Riding Precautions

oot

Saf

Turn the handlebar fully to the left.

Turning the handlebar to the right reduces
stability and may cause the scooter to fall.

Turn the ignition switch to the LOCK position
and remove the key.

P. 29, 30

Turn the ignition switch to the LOCK
position, remove the key, and close the
shutter.

P. 29, 30

Follow these guidelines to protect the engine
and catalytic converters:

●

Use only unleaded petrol.

●

Use recommended octane number. Using
lower octane petrol will result in decreased
engine performance.

●

Do not use fuels containing a high
concentration of alcohol.

P. 100

●

Do not use stale or contaminated petrol or an
oil/petrol mixture.

●

Avoid getting dust, or water in the fuel tank.

Left handle grip

Grab rail

Centre stand

Refuelling and Fuel Guidelines

Except U, KO type

U, KO type

Содержание Forza 300 2013
























































































































Результаты поиска

Содержание Forza 300 2013

Отзывы:

Honda Forza 300 2013, Руководство пользователя, Страница: 18 / 119

Результаты поиска

Содержание Forza 300 2013

Отзывы: