CONTROLS & FEATURES
29
Overload Alarm (Indicator)
If the generator is overloaded (in excess of 3.2 kVA), or if there is a short circuit in
a connected appliance, the overload alarm indicator (red) will come ON. The
overload alarm indicator (red) will stay ON, and after about 10 seconds, when an
overload or about 5 seconds in case of a short circuit, current to the connected
appliance(s) will shut off, and the output indicator (green) will go OFF. However,
the engine will continue to run.
If the overload alarm indicator (red) blink continuously press and hold the ECO
Throttle switch to reset it (see page 25).
Oil Alert/Check Indicator
The Oil Alert
system is designed to prevent engine damage caused by an
insufficient amount of oil in the crankcase. Before the oil level in the crankcase
can fall below a safe limit, the Oil Alert/Check indicator (red) comes ON and the
Oil Alert system automatically will stop the engine (the engine switch will
remain in the ON position).
If the engine stops or the Oil Alert/Check indicator (red) comes ON when you
pull the starter grip, check the engine oil level (see page 37) before
troubleshooting in other areas.
If the Oil Alert/Check indicator (red) blink continuously, it suggests an
abnormal, contact your servicing dealer.
OVERLOAD ALARM INDICATOR
(RED)
OIL ALERT/CHECK INDICATOR
(RED)
ご担当者様(打上げ帳票
No.27)
ダスト吸い込み防止機構が機能
した際の対応を記載いたしまし
た。本機構が機能した際は、他
のフューエルセーフ同様オイル
警告灯が点滅する認識ですが、
問題ないかご確認ください。
Содержание EU32i
