Honda CBR250R Скачать руководство пользователя

Страница: 81 / 91

Honda Motorcycle & Scooter India Pvt. Ltd.

CBR 250R

WARNING

Pet

rol is highly flammable and explosive.

You can be burned or seriously injured

when handling fuel.

• Stop the engine and keep heat, sparks,

and flame away.

• Refuel only outdoors.

• Wipe up spills immediately.

4. To prevent rusting in the cylinder,

perform the following:

• Remove the spark plug cap from

the spark plug. Using tape or string,

secure the cap to any convenient

plastic body part so that it is

positioned away from the spark plug.

• Remove the spark plug from the

engine and store it in a safe place.

Do not connect the spark plug to the

spark plug cap.

• Pour a table spoon (15-20 cm

) of

clean engine oil into the cylinder and

cover the spark plug hole with a

piece of cloth.

• Crank the engine several times to

distribute the oil.

• Reinstall the spark plug and spark

plug

cap.

5. Remove the battery. Store in an area

protected fr

om freezing temperatures

and direct sunlight.

6. Wash and dry the vehicle. Wax all

painted surfaces. Coat chrome with rust

inhibiting oil.

7. Lubricate the drive chain (page 59).

8. Inflate the tyres to their recommended

pressures. Place the vehicle on blocks to

raise both tyres off the ground.

9. Cover the vehicle (don’t use plastic

or other coated materials) and store in

an unheated area, free of dampness

with a minimum of daily temperature

variation. Do not store the vehicle

in direct sunlight.

REMOVAL FROM STORAGE

1. Uncover and clean the vehicle.

2. Change the engine oil if more than 4 months

have passed since the start of storage.

3. Drain any excess aerosol rust-inhibiting

oil from the fuel tank. Fill the fuel tank

with fresh petrol.

4. Perform all Pre-ride Inspection checks

(page 38).

Test ride the vehicle at l

ow speeds in a safe

riding area away

from traffic.

Содержание CBR250R




























































































Результаты поиска

Содержание CBR250R

Отзывы:

Похожие инструкции для CBR250R

Бренды по названию

Популярные бренды

Honda CBR250R, Руководство пользователя

Результаты поиска

Содержание CBR250R

Отзывы:

Похожие инструкции для CBR250R

Бренды по названию

Популярные бренды