Honda CBR250R Скачать руководство пользователя страница 30

Страница: 30 / 91

Honda Motorcycle & Scooter India Pvt. Ltd.

CBR 250R

WARNING

FUEL

Fuel Tank

The fuel tank capacity including the reserve

supply is:
13 Ltr. (3.43 US gal , 2.86 Imp gal)
To open the “Fuel Fill Cap” (1), open the

“Lock Cover” (2), insert the “Ignition

Key”(3) and turn it clockwise. The fuel fill

cap will pop up and can be lifted off. Do not

overfill the tank. There should be no fuel

above the “Level Plate” (4).
After refue

lling, to close the fuel fill cap,

align the latch in the cap with the slot in

the filler neck. Push the fuel fill cap into the

filler neck until it snaps closed and locks.

Remove the key and close the lock cover.

Petrol is highly flammable and explosive.

You can be burned or seriously injured

when handling fuel.
• Stop the engine and keep heat, sparks,

and flame away.

• Refuel only outdoors.
• Wipe up spills immediately.

(1) Fuel Fill Cap

(2) Lock Cover

(3) Ignition Key

(4) Level Plate

(4)

(3)

(1)

(2)

Содержание CBR250R




























































































Результаты поиска

Содержание CBR250R

Отзывы:

Бренды по названию

Популярные бренды

Honda CBR250R, Руководство пользователя

Результаты поиска

Содержание CBR250R

Отзывы:

Бренды по названию

Популярные бренды