2.
Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
3.
Adjust the drive chain.
4.
Install and tighten the rear axle nut.
Torque:
135 N·m (13.8 kgf·m, 100 lbf·ft).
5.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20200103191036_32MKR8000_eng_BOOK Page 220 Friday, January 03 2020 19:24:26 JST
Tyre Puncture
u
Removing Wheels
Troubleshooting
217
Brake caliper bracket
Swingarm
Lug
Slot