#
Front Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
1.
Make sure the electrical system is turned
off.
2.
Slide the connector cover, and then
disconnect the front suspension
connector from the coupler clip.
3.
Disconnect the front suspension
connector.
u
Do not remove by pulling on the wire
harness.
20200103191036_32MKR8000_eng_BOOK Page 189 Friday, January 03 2020 19:24:26 JST
Other Adjustments
u
Adjusting the ÖHLINS Smart EC System
Maintenance
186
Connector
cover
Front suspension
connector
Coupler clip
Push
Push
Adjuster