In the following cases, pop-up information of
"START MODE" with gray background
appears, system is not allowed.
●
The vehicle is not at standstill.
●
Torque Control is off.
●
The gear position is other than neutral or
1st gear.
●
The side stand is down.
●
The throttle is not closed completely.
●
The coolant temperature is low.
●
The "START MODE REV" setting is "OFF".
e
Press and hold the
sel up or
sel
down switch and PASSING/LAP switch until
the “START MODE” pop-up information with
orange background appears in the display.
The system is allowed.
f
Shift the transmission to 1st gear.
g
Start the vehicle with the throttle fully open.
u
The engine revolution is limited by the
set value of "START MODE REV", the
pop-up information changes from
orange background to green
background, all shift indicators start
flashing. To set the engine revolutions.
u
Engage the clutch gradually.
u
After engaging the clutch, start mode
controls the optimum torque.
20200103191036_32MKR8000_eng_BOOK Page 123 Friday, January 03 2020 19:24:26 JST
Operation Guide
120
Start Mode
(Continued)
Pop-up information
Shift indicators