#
Front Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
1.
Make sure the electrical system is turned
off.
2.
Slide the connector cover, and then
disconnect the front suspension
connector from the coupler clip.
3.
Disconnect the front suspension
connector.
u
Do not remove by pulling on the wire
harness.
20200219171806_31MKR6000_enu_BOOK Page 179 Wednesday, February 19 2020 17:28:26 JST
Other Adjustments
u
Adjusting the ÖHLINS Smart EC System
Maintenance
176
Connector
cover
Front suspension
connector
Coupler clip
Push
Push
Adjuster