g
Fully open the throttle.
u
Engine RPMs will be limited by the set
value of "START MODE REV" The "START
MODE" pop-up information background
will change from orange to green and all
shift indicators will flash. To set the
"START MODE REV"
u
Gradually engage the clutch.
u
After engaging the clutch, Start Mode
controls the torque.
After the vehicle starts moving, it will
deactivate when any one of the following
conditions occurs:
●
The transmission is shifted into 3rd gear.
●
The RPMs reach the shift indicator limit
●
A lean angle greater than 20 degrees
occurs.
●
The throttle is closed.
NOTICE
To prevent clutch damage, always wait at least 3
minutes between each Start Mode activation.
20200219171806_31MKR6000_enu_BOOK Page 120 Wednesday, February 19 2020 17:28:26 JST
Operation Guide
117
Pop-up information
Shift indicators