CLEAN Indicator Light
(US: SE, Canada: LX/SE)
After 50 hours of cassette tape play, the CLEAN indicator light will
come on as a reminder to clean the tape heads. If the light comes on
and the tape heads were not cleaned at the recommended 30 hours
of usage (see maintenance section on the next page), they should be
cleaned immediately. To reset, push the indicator with a pointed
instrument such as a ball-point pen until the light goes off (about 5
seconds).
(US: LX/EX/Anniversary Edition, Canada: EX/EX-R)
After 30 hours of cassette tape play, the CLEAN indicator light will
come on as a reminder to clean the tape heads. If the light comes on
and the tape heads were not cleaned at the recommended 30 hours
of usage (see maintenance section on the next page), they should be
cleaned immediately. To reset, push the indicator with a pointed
instrument such as a ball-point pen until the light goes off (about 3
seconds).
Defective Tape Eject
The tape player includes a protection mechanism to automatically
eject defective tapes (warped housing, loose label, faulty tape
movement) immediately upon insertion. If a tape malfunctions while
in play, the tape direction will change back and forth and then eject
the cassette. Tapes ejected before play should be considered faulty
and discarded; tapes ejected during play may only be unevenly
wound and could be re-usable if fully rewound, manually, outside the
player.
NOTE:
The tape player may repeat cycle through the loading and unloading
motion several times in an effort to eject a faulty tape. During this
process the tape will either eject fully or rise to the loading level and
have to be pulled out manually. In either case, discard the tape; re-
use may damage the tape player.
(cont'd)
Содержание Accord lx 1993
Страница 115: ...I n f o r ma t i o nP r o v i d e db y ...
Страница 159: ...page 130 I n f o r ma t i o nP r o v i d e db y ...