Using Child Restraints With Tethers
Your Honda has three attachment points for tether-style child seats.
Remove the plug cover from the attachment points shown in the
illustration, then install the tether hardware that came with the child
seat. Tighten the bolt to:
22 N.m(2.2 kg-m , 16 Ib-ft)
If you are not sure how to install the bracket, have it installed by
your Honda dealer.
If you need an anchor plate and mounting hardware, you can obtain
them by writing to:
American Honda Motor Co., Inc.
Consumer Affairs
1919 Torrance Blvd.
Torrance, CA 90501-2746
Canadian Cars
The anchor plate and mounting hardware for a top tether are
supplied with the car. When installing, make sure the toothed
washer is on the bottom of the bolt.
The supplied anchor plate is designed only for mounting a child
restraint. Do not use it for any other purpose.
Storing a Child Seat
When you are not using an infant seat or other child restraint, either
remove it or make sure it is properly secured so it cannot be thrown
around the car during a crash.
Содержание Accord lx 1993
Страница 115: ...I n f o r ma t i o nP r o v i d e db y ...
Страница 159: ...page 130 I n f o r ma t i o nP r o v i d e db y ...