System Setup
Navigation System
121
Switching Display Mode Automatically
llumination control
Operation
But remember
Display Mode
button
(see page 10 ) Allows selection of
Day
,
Night
or
Off
display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
When the car is restarted, the display mode
previously selected by this button is canceled
and is determined by one of the controls
below.
Sunlight sensor (middle of dash near the
windshield, see your owner’s manual for
location)
If the sunlight sensor detects daylight and
the headlights are turned on, the system
automatically overrides (cancels) the
Night
display and displays the
Day
display mode.
If desired, use the
Display Mode
button
to override this automatic choice.
Dash illumination adjustment knob (see
your owner’s manual for location)
When headlights are turned on, and you wish
to have the
Day
display mode, then adjust the
illumination to the full bright setting (beeps).
With the headlights on, adjust the dash
brightness back to mid-range to allow auto
switching by sensing whether the headlights
are on or off.
Headlights (Auto/On/Off)
When turned on, the display changes to
Night
display mode. The previous two controls listed
above can cancel this function.
Use the
Display Mode
button,
or, with
the headlights on, adjust the dash illumination
to full bright to set the display to your desired
choice.
Map
Day/Night
screen color choice
(see page 119 for the
Day
and
Night
color
choices)
The user can select the color of the screen
that will be displayed for the
Day
and
Night
display modes.
For best contrast, ensure that the map color is
white for
Day
and black for
Night
.
Recommended Display Mode Day/Night settings:
• With the headlights on, select mid-range for the dash illumination (see your owner’s manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see your owner’s manual for location of knob).
• On the
SET UP “Color” adjustment
screen, choose white for the map
Day
display and black for the map
Night
display (see
page 119 ). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
NOTE:
See your owner’s manual for additional information regarding the dash brightness adjustment.