System Setup
112
Navigation System
Traffi c Rerouting
This feature considers traffi c
information when carrying out
automatic rerouting. Select either
ON
or
OFF
for this function. Please see
Traffi c Rerouting on page 75 .
To access the guidance mode from the
SET UP
screen, select the “Other” tab,
Routing & Guidance
,
and
Traffi c
Rerouting
.
See Traffi c & Weather Status on page 126
regarding verifying reception status.
This is set to
OFF
as factory default.
NOTE:
Automatic traffi c rerouting may give
inappropriate guidance in metro areas
with limited or incomplete traffi c fl ow
data.
Edit Avoid Area
This function allows you to select areas
you wish to avoid when calculating a
route to your destination. You can select
up to fi ve areas to avoid. You may wish
to set up an “avoid area” to route around
long-term road construction, closures,
or any area you wish to avoid. If you
enter a route that takes you through or
into an “avoid area,” a pop-up box will
warn you that your route takes you into
one of these areas. However, you can
still choose destinations in an avoided
area.
When you select
Edit Avoid Area
, the
following list screen is displayed.
You can select
New Area
, or select
one of your existing areas to modify. If
you choose
New Area
, the following
screen is displayed:
Say or select
Edit Name
, and use the
Interface Dial
to enter the name on
the
Enter avoid area name
screen (25
characters max). Say or select
OK
to
return to the previous screen.
