49
FRONT AND REAR WHEELS AND TIRES
Tires
Proper air pressure will provide maximum stability,
riding comfort and tire life.
Check tire pressure frequently and adjust if necessary.
NOTE :
•
Tire pressure should be checked when the tires are
"cold".
Wheel Rims And Spokes
1. Inspect wheel rims and spokes for damage.
2. Tighten any loose spokes and rim locks.
TORQUE:
Spoke:
2.7 Ibf
･
ft (3.7 N
･
m. 0.38 kgf
･
m)
Rim lock: 9.4 Ibf
･
ft (13 N
･
m, 1.3 kgf
･
m)
3. Check wheel rim runout. If runout is noticeable, see
the Honda Service Manual for inspection.
FRONT SUSPENSION
Inspection
1. Make sure that the fork protectors and dust seals
are clean and not packed with mud and dirt.
2. Check for signs of oil leakage. Damaged or leaking
fork seals should be replaced before your CRF is rid-
den.
NOTE :
•
Install the wear ring with its end gap facing rear-
ward.
(1) RIM LOCK
(2) LOCK NUT
Axles And Wheel Bearings
(See the Honda Service
Manual for inspection):
1. Check the axle for runout.
2. Check the condition of the wheel bearings.
(1) FORK PROTECTOR
(2) DUST SEAL
3. Inspect the wear rings for wear or damage. Replace
the wear ring if it is 0.06 in (1.5 mm) or flat with the
outer tube.
(1) WEAR RING
(2) OUTER TUBE
(1) WEAR RINGS
Front: 15 (100, 1.0)
Rear: 15 (100, 1.0)
Cold tire pressures
psi (kPa, kgf/cm
2
)
Front: 80/100-21 M/C 51M
Rear: 110/90-19 M/C 62M
Tire size
2
1
