Lights
Spotlights:
pry on the front edge of the lens
about 1 inch from each end.
Remove the bulb cover by pulling
it straight down.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
Replacing the Trunk Light Bulb
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
Maintenance
SPOTLIGHT (On some models)
BULB
COVER
LENS
VANITY MIRROR LIGHT
(On some models)
TRUNK