Cooling System
8. Loosen the bleeder bolt on top of
the engine. Tighten it again when
coolant comes out in a steady
stream with no bubbles.
9. Refill the radiator to the base of
the filler neck. Start the engine
and let it run until it warms up
(the radiator cooling fan comes on
at least twice).
10.Turn off the engine. Check the
level in the radiator, add coolant if
needed. Install the radiator cap,
and tighten it fully.
11.Fill the reserve tank to the MAX
mark. Install the reserve tank cap.
Maintenance
BLEEDER BOLT
RESERVE TANK