Lights
Replacing a Front Turn Signal
Light Bulb
1. Use a Phillips-head screwdriver to
loosen the turn signal assembly's
mounting screw.
2. Remove the turn signal assembly
from the bumper.
3. Remove the bulb holder from the
turn signal assembly by turning it
counterclockwise.
4. Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
5. Install the new bulb in the socket.
6. Push the bulb holder into the turn
signal assembly and turn it
clockwise until it locks.
7. Test the lights to make sure the
new bulb is working.
8. Put the turn signal assembly into
the bumper. Make sure the tabs
on the turn signal assembly fit into
the bumper slots. Tighten the
mounting screw.
Maintenance
TURN SIGNAL ASSEMBLY
BULB
BULB HOLDER