Cooling System
4. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
5. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator. Put a new
washer on the drain bolt, then
reinstall the drain bolt in the
engine block. Tighten it securely.
Tightening torque:
83 N.m (8.5 kgf.m, 61 Ibf.ft)
6. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
With 5-speed manual transmission:
5.4 (1.43 US g a l , 1.19 Imp gal)
With automatic transmission:
5.3 (1.40 US g a l , 1.17 lmp gal)
7. Pour coolant into the radiator up
to the base of the filler neck.
CONTINUED
Maintenance
RESERVE TANK
HOLDER
RESERVE TANK CAP
FILLER NECK
Fill up to here