Lights
2. Move the side marker light
assembly forward until it
pops out of the body.
3. Turn the bulb holder
one-quarter turn
counterclockwise to remove
it from the lens.
4. Pull the bulb straight out of
its socket. Push the new bulb
straight into the socket until
it bottoms.
5. Put the bulb holder back into
its hole in the lens, and turn
it clockwise until it locks.
6. Turn on the parking lights,
and check that the new bulb
is working.
7. Put the side marker assembly
back into the body. Push on
the front edge until it snaps
into place. Install the
mounting screw, and tighten
it securely.
Replacing Rear Bulbs
1. Open the tailgate, and
remove the taillight assembly
cover.
2. Pull the taillight assembly out
of the body.
3. To open the tabs on the
taillight assembly, push in on
the tab and lift it up. (You
may use a flat-tip screwdriver
to gently pry it open.)
Remove the screws under
each tab. Then, slide the
taillight assembly diagonally
out.
4. Determine which of the three
bulbs is burned out: tail/
stoplight, back-up light, or
turn signal. Remove that bulb
by turning it one-quarter turn
Maintenance
continued
Содержание 1995 Accord Wagon
Страница 60: ...Heating and Cooling Comfort and Convenience Features...
Страница 165: ...Fuses UNDERHOOD FUSE BOX 1 On Canadian cars 2 U S EX Taking Care of the Unexpected...
Страница 166: ...Fuses ABS FUSE BOX INTERIOR FUSE BOX Taking Care of the Unexpected...
Страница 172: ...Specifications 1 U S LX Canada EX 2 U S EX Technical Information...