Honda 1995 Accord Wagon, Руководство пользователя

Страница: 114 / 197

Engine Oil
3. Remove the oil filter, and let
the remaining oil drain. A
special wrench (available
from your Honda dealer) is
required to remove the filter.
4. Install a new oil filter
according to the instructions
that come with it.
5. Put a new washer on the
drain bolt with the flat side
toward the engine, and then
reinstall the drain bolt.
Tighten it to 33 Ib-ft (4.5
kg-m, 44 N.m).
6. Refill the engine with the
recommended oil. Engine oil
capacity (including filter):
U.S.: LX, Canada: EX
4.0 U.S. qt ( 3.8 , 3.3 Imp. qt.)
U.S.: EX
4.5 U.S. qt (4.3 , 3.8 Imp. qt.)
7. Replace the oil fill cap. Start
the engine. The indicator
light should go out within five
seconds. If it does not, turn
off the engine and inspect
your work.
8. Let the engine run for several
minutes; then, check the
drain bolt and washer and
the oil filter for leaks.
9. Turn off the engine, and wait
for several minutes; then,
check the oil level. If
necessary, add oil to bring
the level to the upper mark
on the dipstick.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a waste bin or
dump it on the ground.
The oil and filter should be
changed every 6 months or 7,500
miles (12,000 km), whichever
comes first. Under severe driving
conditions, they should be
changed every 3 months or 3,750
miles (6,000 km). See page
109
for a description of severe
driving conditions.
Maintenance
NOTICE
OIL FILTER WRENCH
OIL FILTER