Honda 1994 NSR 250 SP, Руководство по установке

Страница: 21 / 48

1-19
4. Rear shock absorber
•
Standard specification
NSR250R NSR250R SE/SP
Sizes of spring preload
10mm from the length of
spring free
10mm from the length of
spring free
Length of setting spring (for reference) 179mm (for reference) 165mm
Position of compression adjuster - 1.0 reverse (from MAX)
Position of rebound adjuster - 1.0 reverse (from MAX)
•
A kit is set up to the standard spring.
•
Spring bayonet:
Standard: k = 12.0kgf/mm
Kit: k = 11.0/13.0kgf/mm
5. Exchanging the rear shock absorber
i) Insert a jack between the step stand or rear type and the seat rail to prevent the frame from
dropping.
ii) Remove the rear shock absorber from the frame body.
iii) Loosen the lock nut with a pin spanner, then loosen the adjuster to the full.
Pin spanner: 07702-0020001
iv) Slide the spring seat, remove the stopper plate then exchange the spring.
v) Fit the length of the spring to the standard position.
vi) Try running and adjust shock if necessary.
Tightening torque rear shock absorber:
UP:12kgf.m
LOW: 10kgf.m