Honda 1994 NSR 250 SP, Руководство по установке

Страница: 11 / 48

1-9
5. SEALING PLUG SET
1. Kick starter
•
As the kick start is not used during racing, remove the spindle shaft, then press the sealing plug
∅
28 in where the shaft has stayed.
Sealing plug
∅
28: 90871-733-003
2. Oil pump
•
The oil pump is not used for a machine installed with the kit as mixed petrol (petroil) is used,
therefore, remove it and press the sealing plug
∅
20 in.
Sealing plug
∅
20: 91201-NH3-003
•
Apply adhesive to the cone plug 4.5 x 8, then press it in the crank case.
Cone plug 4.5x8: 90807-NKD-940
3. Oil filler cap
•
Make a hole on the standard oil filler cap for wiring (
∅
2) with a drill or exchange it for the kit.
Oil filler cap: 15611-NH3-000
4. Oil drain bolt
•
Make a hole on the standard drain bolt for wiring (
∅
2) with a drill or exchange it for the kit.
Oil drain bolt: 90081-NF5-000