Lights
4. Remove the bulb by pushing it in
slightly and turning it counter-
clockwise.
5. Install the new bulb in the socket.
Turn it clockwise to lock it in
place.
6. Insert the socket back into the
lens. Turn it clockwise to lock it
in place.
7. Turn on the parking lights to
make sure the new bulb works.
8. To reinstall the light assembly in
the fender, line up the guide on
the assembly with the metal tab
next to the headlight and line up
the fingers on the light assembly
with the holes in the fender.
Push the light assembly straight
back.
9. Install the mounting screw and
tighten it securely.
Replacing Rear Bulbs (in
Fenders)
1. Open the hatch and tailgate.
2. Remove the cover from the
inside panel by pulling on its edge.
3. Determine which of the three
bulbs is burned out: tail/stoplight,
turn signal, or side marker.
Remove the socket for that bulb
by turning it counterclockwise.
4. To remove either the tail/
stoplight bulb or the turn signal
bulb, push it in slightly and turn
it counterclockwise. To remove
the side marker bulb, pull it
straight out of the socket.
CONTINUED
Maintenance
Main Menu
Table of Contents
▲
▼
