Changing a Flat Tire
If you have a flat tire while driving,
stop in a safe place to change it.
Stopping in traffic or on the shoul-
der of a busy road is dangerous.
Drive slowly along the shoulder
until you get to an exit or an area to
stop that is far away from the traf-
fic lanes.
1. Park the car on firm, level
ground away from traffic. Turn
on the hazard warning lights and
turn the ignition to LOCK (0).
2. Put the transmission in Park
(automatic) or Reverse (manual).
Set the parking brake.
3. Open the hatch and tailgate.
Raise the cargo area floor by
lifting up on the back edge.
4. Take the tool kit from the spare
tire well. Remove the jack (in the
jack cover) from the inside of the
spare tire.
5. Unscrew the wing bolt and take
the spare tire out of its well.
6. Loosen the four wheel nuts 1/2
turn with the wheel wrench.
CONTINUED
Taking Care of the Unexpected
The car can easily roll off the
jack, seriously injuring anyone
underneath.
Follow the directions for chang-
ing a tire exactly, and never
get under the car when it is
supported only by the jack.
SPARE TIRE
TOOL KIT
JACK
CARGO AREA FLOOR
Main Menu
Table of Contents
▲
▼