Hazard Warning System
This system should be used only when
your car is stopped under emergency
or hazardous conditions. To activate,
push the hazard warning switch ( ).
The front and rear turn signals will blink
simultaneously and both indicator
lights will flash.
Push the switch ( ) again to turn the
system off.
CAUTION: Be sure to push the switch all the way off when the
hazard warning is no longer required, or the turn signals will not
work properly.
Panel Brightness Control
The intensity of the instrument lights
can be adjusted when the light switch
is in either of the two "ON" positions.
Push the button so it pops out, then turn
the panel brightness control knob.
Ignition Switch Light
This light illuminates the switch when
the driver's door is opened and
remains on for several seconds after
the driver's door is closed.
PUSH
Push