Using Child Restraints With Tethers
Your Honda has three attachment
points for tether-style child seats.
Remove the cover from the desired
attachment point, shown in the
illustration, then install the tether
hardware that came with the child
seat. Tighten the bolt to:
16 lb.ft (22 N.m, 2.2 kg.m)
If you are not sure how to install the
bracket, have it installed by your
Honda dealer.
If you need an anchor plate and
mounting hardware, you can obtain
them by writing to:
American Honda Motor Co., Inc.
Consumer Affairs
1919 Torrance Blvd.
Torrance, CA 90501-2746
Canadian Cars
The anchor plate and mounting hardware for
a top tether are supplied with the car. When
installing, make sure the toothed washer is
on the bottom of the bolt.
The supplied anchor plate is designed only
for mounting a child restraint. Do not use it for
any other purpose.
TETHER
ATTACHMENT
POINTS
CHILD SEAT
ANCHOR PLATE
Storing a Child Seat
When you are not using an infant seat or other child restraint, either
remove it or make sure it is properly secured so it cannot be thrown
around the car during a crash.