2 of 3
AII 49542 (1306)
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
Installing the Rear Splash Guards
1.
Remove one bolt and three screws from the left rear
inner fender and rear bumper.
012905AB
LEFT REAR
INNER FENDER
FRONT
REAR
BUMPER
3 SCREWS
BOLT
2.
Secure the left rear splash guard to the left rear inner
fender and rear bumper with one 5 x 25 mm self-
tapping screw, one bolt removed step in 1 and two
screws removed step in 1. While holding the splash
guard firmly against the fenderwell, tighten the self-
tapping screw, screws and bolt in the order
.
NOTE: Check for a gap between the splash guard
and the body. If a gap exists, loosen the screws and
repeat the above procedure.
012906CB
LEFT REAR
INNER FENDER
LEFT
REAR
SPLASH
GUARD
FRONT
BOLT
5 x 25 mm
SELF-TAPPING SCREW
1
2
3
REAR
BUMPER
4
2 SCREWS
3.
Remove one bolt and two screws from the right rear
inner fender and rear bumper.
042701AY
RIGHT REAR
INNER FENDER
FRONT
REAR
BUMPER
BOLT
2 SCREWS
4.
Secure the right rear splash guard to the right rear
inner fender and rear bumper with one hook, one 5 x
25 mm self-tapping screw, one bolt removed step in
3 and one screw removed step in 3. While holding
the splash guard firmly against the fenderwell,
tighten the self-tapping screw, screw and bolt in the
order
.
NOTE: Check for a gap between the splash guard
and the body. If a gap exists, loosen the screws and
repeat the above procedure.
042702BY
RIGHT REAR
INNER FENDER
RIGHT
REAR
SPLASH
GUARD
FRONT
BOLT
1
2
3
REAR
BUMPER
HOOK
SCREW
5 x 25 mm
SELF-TAPPING
SCREW
