08B28-SMR-6001-96
24 / 32
In case of a car without a navigation system, start
the work from step 21. In case of a car with a naviga-
tion system, start the work from step 32.
<Car without a navigation system>
21. Cut the ribs of the glove box.
•
Remove any burr.
6706061Y
RIB
Cut off.
GLOVE BOX
UTILITY KNIFE
Cut on the extension of the rib.
45 mm
30 mm
22. Remove the two screws from the adapter unit.
23. Install the two adapter brackets B with the two
removed screws on the adapter unit.
•
Install the two adapter brackets B at the
correct positions in the correct orientation.
6706050Y
ADAPTER
BRACKETS B (2)
SCREW
(Reused.)
ADAPTER
UNIT
24. Align the centers of the cut rib positions with
the centers of the adapter bracket B holes and
set the adapter unit.
25. Use a felt-tip pen and mark at two locations at
the adapter bracket B holes.
6706070Y
FELT-TIP PEN
MARK
Mark the locations
where the adapter
bracket B hole centers
coincide with the
former rib centers.
GLOVE
BOX
ADAPTER
UNIT
ADAPTER
BRACKETS B (2)
ADAPTER
UNIT
MARK
