177
Au
d
io
Playing an iPod®
1.
Open the USB cover.
2.
Install the iPod® dock connector to the USB connector.
■
Connecting an iPod®
1
Connecting an iPod®
•
Do not connect your iPod® using a hub.
•
Do not use a device such as a card reader or
hard disk drive, as the device or your tracks
may be damaged.
•
We recommend backing up your data before
using the device in your vehicle.
•
Displayed messages may vary depending on
the device model and software version.
Your audio system may not work with all
software versions of these devices.
If the audio system does not recognize your
iPod®, try reconnecting it a few times or reboot
the device.
State or local laws may prohibit the operation of
handheld electronic devices while operating a
vehicle.
■
Model Compatibility
Model
iPod (5th generation)
iPod classic 80GB/160GB (launch in 2007)
iPod classic 120GB (launch in 2008)
iPod classic 160GB (launch in 2009)
iPod nano (1st to 6th generation) launch in 2010
iPod touch (1st to 4th generation) launch in 2010
iPhone 3G/iPhone 3GS/iPhone 4/iPhone 4S