Honda Electronics HE-1501, Руководство по эксплуатации

Страница: 104 / 128

96
Menu item Meaning of setting
9. SOUNDER
1. DISPLAY
※
It is shown when LOW+HIGH is selected only.
※
600W-200kHz, 1.2kW-200kHz or 3.0kW-200kHz does
not have dual frequency function.
Switch single frequency display on dual frequency
simultaneous display.
LOW
：
only low freq. HIGH
：
only high freq.
LOW
＋
HIGH
：
Low freq. on left screen and high
freq. on right screen
HIGH
＋
LOW
：
High freq. on left screen and low
2. SWEEP
SPEED
Set sounding rates per one sweep. (Sweep/Sounding
rate
）
x2, x3, 1/1, 1/2, 1/4, 1/8, Freeze: Stop sweep
3. AUTO
RANGE
Adjust range automatically so that bottom is shown at
optimum position of screen.
RANGE
：
Change the range automatically.
SHIFT
：
Move the displayed range automatically.
OFF
：
Not used.
4. AUTO
GAIN
Adjust sensitivity automatically.
LOW
：
Keep sensitivity low.
HIGH
：
Keep sensitivity high.
OFF
：
Not used.
5.
EXPANSION
1. EXP.MODE Enlarge display
BOTTOM LOCK: Bottom contour is indicated as a straight line and
expansion view of certain area from it’s contour is shown.
AUTO EXP
：
Enlarge up or down in the center of bottom.
MANUAL EXP
：
Enlarge up or down in the center of option bottom.
OFF
：
Cancel expansion mode.
2. EXP. RATE
Set expansion rate when expansion mode is set.
x2
（
2 times
）
x4
（
4 times
）
x8
（
8times
）
6. A-MODE Indicate the strength of reflected signal.
ON
：
Used OFF
：
Not used
7. COLOR 1. BACK
SET COLOR
Set background color of screen.
BLACK
，
BLUE
，
WHITE
，
DARK BLUE
2. COLOR
CONFIGURATION
Strength of reflected signal is shown in 7 ranks of
color
（
except for background color 0
〜
6 7ranks
）
1
3. CLUTTER
Eliminate from the weakest signal (color) in turn.
（
0
〜
12 ranks
）
8. OTHERS 1. UNIT Set the unit of depth readout.
METERS, FATHOMS, FEET, BRAZAS
2. SCALE
LINE
Indicate line on depth scale.
ON
：
Indicated OFF
：
Not indicated
3. SUPER
RANGE
When depth range changes, it writes whole previous image
recorded on screen after change. ON
：
Used OFF
：
Not used
4. TEMP
GRAPH
Indicate water temp. graph (Water temp. sensor is
option.)ON
：
Indicated OFF
：
Not indicated
5. SPECIAL 1. AUTO RANGE
SETUP MAX
Set Maximum depth of Auto Range.
30m,50m,100m, 200m,300m,Max. Depth
2. CLEAN ECHO
Show clear display less noise.
STRONG
：
Used WEAK
：
Used OFF
：
Not used
3. STC Eliminate reflection like plankton and air bubble.
WEAK
・
MEDIUM
・
STRONG OFF
：
Canceled
4. OUTPUT POWER Switch transmitting output.
HIGH
・
LOW
※
is at factory setting.
LIST OF FISH FINDER MENU AND MEANING