Honda Electronics HE-1501, Руководство по эксплуатации

Страница: 68 / 128

62
Menu Item Meaning of setting
2. MEMORY 1. INITIALIZE Initialize memory card.
CARD MEMORY CARD
2. STORE FROM Store information set in main unit into memory card.
UNIT TO CARD
(
→
page 30)
3. STORE FROM Reading information stored in memory card into main
CARD TO UNIT
unit.
（→
page 30
）
3.
UNIT
1.DISTANCE Select
“
NM
”
or
“
km
”
.
SWITCH
2. TEMP. UNIT Select
“℃”
or
“˚
F
”
.
4. GPS 1. SMOOTHING When unevenness arises in measured value due to HDOP or S/A,
SETTING measured value is averaged and wake, etc. is indicated smoothly.
If set value is strengthened (weak
→
strong), change of latitude/
longitude display will be displayed when boat moves heavily.
2. BEACON Set beacon receiver.
SETTING 1. FREQ. AUTO
：
Search for beacon station automatically and capture
optimum beacon station.
Set baurate as well as receiving frequency.
MANUAL: Set frequency and bow rate manually.
2. BAURATE Set baurate when it is set manually. 200
Select with left/right of [CENTER] key.
3. FREQ AT Designate frequency when it is set manually. 288.0
MANUAL SET Select with left/right of [CENTER] key.
3. INITIALIZE
GPS Initialize GPS.
5.CORRECTION
1. LOCAL TIME Correct local time.
CORRECTION Select with left/right of [CENTER] key.9:00
2. GPS AZIMUTH 1.GPS AZIMUTH Select GPS Azimuth.
Real Azimuth
・
Magnetic Azimuth
2.MAG/AZIMUTH Set magnetic azimuth. It is effective when upper
DEVIATION item is set to “Magnetic Azimuth.” W5.4
3. BOAT POSI 1. BOAT POSI Designate whether own boat position is corrected or not.
CORRECT CORRECT
OFF
：
not correct ON
：
correct
2. LAT CORRECT Designate corrected value of latitude. Select left/right of {CENTER} key.0.000
3. LON CORRECT Designate corrected value of longitude. Select left/right of {CENTER} key.0.000
4.CORRECT VALUE TO 0
Set corrected value of above 2 & 3 to 0.
5.
MOVE TO C/POINT
Move own boat mark to cursor position.
4. TEMP Designate corrected value of water temp. Select with left/
CORRECT right of [CENTER] key. (Water temp. sensor is option.) 0.0
6.
EXT
Set NMEA output.
TERMINAL
OFF
：
Not output ON
：
output
7.
INITIAL
1. INITIAL MENU
Initialize all contents of which are set on menu.
2.
INIT CORR VALUE
Initialize each corrected value only.
3. INITIAL Initialize all stored contents like event mark and
MEMORY DATA waypoint mark.
4. INTIAL ALL Initialize all above 1~3. In order to execute initialization, turn the
Power OFF once and then turn the Power ON.
5. SIMULATION Select whether GPS simulation mode/fish finder simulation
mode is shown or not.
OFF
：
Not show
FIX
：
Own boat is fixed.
MOVE
：
Own boat moves.
（→
page 19
）
* is at factory setting