Honda Electronics HE-1501, Руководство по эксплуатации

Страница: 97 / 128

89
※
Please refer to [HOW TO OPERATE MENU] (
→
page 14) for operation of menu.
TO SHOW DUAL FREQUENCY DISPLAY
Select [9.SOUNDER]
→
[1.DISPLAY] on menu.
Establish [1.DISPLAY].
1
．
LOW
：
Low frequency image is displayed on
whole screen.
2
． HIGH
：
High frequency image is displayed
on whole screen.
3
．
LOW
＋
HIGH
： Low frequency image is
displayed on the left half of screen and high frequen-
cy image is displayed
on the right half of screen.
4
．
HIGH
＋
LOW
： Low frequency image is
displayed on the left half of screen and high frequen-
cy image is displayed
on the right half of screen.
In case of selecting 3 or 4, LOW: low frequency and HIGH: high
frequency are shown on the screen.
1
Change of display
2
Following dual frequency display can be selected.
※
600W-200kHz, 1.2kW-200kHz or
3.0kW-200kHz does not have dual
frequency function.
TO SET SWEEPING SPEED
Select [9.SOUNDER]
→
[2.SWEEP SPEED] on
menu.
Establish [2.SWEEP SPEED].
（
5 steps
：
1/1, 1/2, 1/4, 1/8
）
※
”Mark” of sweeping speed is indicated only
on fish finder display.
1
Sweeping Speed
2
【
Sweeping Speed
】
On fish finder, the newest display (display just under the boat) is shown on the right edge of screen.
At the same time previous display moves leftward. Display of fish finder is formed by repeating such
movement. Sweep speed is speed that display forwards. Display expands or reduces horizontally by
changing the sweeping speed.
【
Relation of sounding rates and sweeping speed
】
5 sweeping speed can be selected on menu. Ratio of sweeping speed vs. sounding rates at each
speed is shown on the below table.
＜
In case of
“50-200”＞