Homing Sega LET'S GO JUNGLE! - LOST ON THE ISLAND OF SPICE, Руководство пользователя

Страница: 45 / 81

HomingGame Best Game Machine Manufacturer
www.hominggame.com
|
www.game-made-in-china.com
|
sales@hominggame.com
TABLE 12 TROUBLESHOOTING TABLE
PROBLEMS CAUSE COUNTERMEASURES
When the main SW is
turned ON, the machine
is not activated. The power is not ON. Firmly insert the plug into the outlet.
Incorrect power source/voltage. Make sure that the power supply/voltage are cor-
rect.
12
The Circuit Protector of the AC After eliminating the cause of overload, have the
Unit functioned due to momen-
tary overcurrent.
Circuit Protector of the AC Unit restored. (See
Section 6 [12], refer to the following.)
The screen is not adjusted cor-
rectly. Adjust the screen correctly.
The projector does not
project an image. The projector lamp is dead. Replace the lamp. (Refer Manual of TOSHIBA
62”DLP manual)
No sound output. Volume is not adjusted properly. Adjust the volume. (See chapter 9.)
Board or amp malfunction. Check by performing a speaker test. (See 9-2.)
Perform calibration in TEST Mode. (See 9-3c.)
The Control Unit (Gun) Due to external or environmen-
does not target correctly. tal factors the targeting is off.
Volume damaged. Exchange the volume. (See 10-2 & 10-3.)
Volume: 220-5753
The Control Unit is not
operating properly. Microswitches damaged. Check ON, OFF on the input test and if it is not
working exchange the microswitch. (See 10-4.)
Microswitch: 601-6729-01
The volume gears are not prop-
erly engaging. Adjust the engagement. (See 10-2 & 10-3.)
Something is trapped or caught
in the revolving or other parts. Remove the trapped item or clean the trigger.
Grease has deteriorated. Apply grease to the designated grease areas.
(See 10-5.)
Control Unit does not
respond. The Control Unit motor is set
not to move. Alter the TEST Mode settings. (See 9-3d.)
Due to overload or other factors, Remove the cause of the motor error.
an error has occurred with the
motor, which has been sensed
by the motor sensor and the mo-
tor has been stopped.
Motor damaged. Exchange the motor.
The Control Unit makes
a lot of noise when it
vibrates. Due to a problem with the vibra- Adjust the position of the vibration parts.
tion parts or wear over time, the (See 10-6.)
internal parts have moved.
The Marquee fluorescent The fluorescent light is dead. Exchange the fluorescent light.
lights don’t come on. Fluorescent Light: 18W
The lights in the cabinet
don’t come on. The fluorescent light is dead. Exchange the fluorescent light.
Fluorescent Light: 15W
42