Homing Sega LET'S GO JUNGLE! - LOST ON THE ISLAND OF SPICE, Руководство пользователя

Страница: 20 / 81

HomingGame Best Game Machine Manufacturer
www.hominggame.com
|
www.game-made-in-china.com
|
sales@hominggame.com
7 PRECAUTIONS WHEN MOVING THE MACHINE
7-1 MOVING THE MACHINE
●
●
Always disconnect the power cable before moving the product. If it is moved with the power cable connect-
7
ed, the cable could be damaged, causing fi re or electric shock.
To move the unit over the fl oor, pull in the adjustors and have the casters contact the fl oor. While moving the
unit, be careful that the casters do not roll over the power cord or the ground wire. If cord or wire is damaged,
there could be electrical shocks and/or short circuits.
●
●
When crossing a sloped or stepped area, disconnect the DLP, Main Cabinet and Seat Cabinet. If you tilt them
while connected together, the connection points may be damaged and personnel could be injured.
When lifting the cabinet up steps, you must hold it by the designated handles or by the bottom surface. Lifting
it by any other area may lead to damage or dis fi guration to that part or surrounding parts due to the weight
of the cabinet and could also lead to injury of personnel.
●
●
When tilting the cabinet to move it across a sloped or stepped area, always use at least two people. Attempt-
ing such an operation alone can lead to accident or injury.
When moving the components separately, take care concerning the direction you push the DLP and Seat
Cabinet in. These elements may fall over, causing damage or an accident.
● When moving the components do not push any of the plastic elements or shaped parts. Do not use them to
pull the components along either. This may damage the parts or the surrounding parts and this could lead to
accidents or injury.
●
●
●
After dividing the components to move them, do not use the Control Units in the Main Cabinet to push or pull
the cabinet. This may damage or dis fi gure these parts and lead to malfunctions or injury.
When moving the separated components, the Top Board on the Seat Cabinet ceiling protrudes out. Be care-
ful not to bang your head on it while working.
If you move the cabinet with the Side Cloth attached, do not push or pull the Side Cloth. This may damage
the Side Cloth, injure your hand or cause the cabinet to tip over.
● When moving the cabinet, do not hold, push or pull the Control Units. This may dis fi gure or damage them.
● If you need to move components through a narrow or low door and the only way to get the separated com-
ponents through is to turn them on their side, or if a separation method other than those described in this man-
ual is required, either make a request to the of fi ce listed in this document or the place of purchase to perform
the operation or contact them regarding how to perform it. Carelessly turning the components onto their side
or separating them in ways other than those depicted in this manual may lead to unrepairable damage.
● Do not press the projector screen. The screen can be easily damaged and cannot be repaired if it is, mean-
ing complete replacement will be necessary.
7-2 SEPARATING THE MAIN CABINET (62”DX)
● Do not carelessly separate the components of the Main Cabinet. This may lead to accidents during mainte-
nance and electric shocks or short circuits during operation.
● After separation of the Main Cabinet, the individual Front Cabinet and Rear Cabinet are not suf fi ciently strong.
Take care which places you push or pull. Do not turn the components onto their sides. This may lead to dis-
fi gurement or damage and could cause accidents during maintenance. It could even lead to unrepairable
damage.
●
●
To work safely and precisely prepare a steady, safety stool or ladder to stand on. Climbing onto the cabinet
or hanging down from it can lead to accidents.
Perform the separation operation with at least two people. Performing the operation alone could lead to an
accident.
17