Homing Sega LET'S GO JUNGLE! - LOST ON THE ISLAND OF SPICE, Руководство пользователя

Страница: 37 / 81

HomingGame Best Game Machine Manufacturer
www.hominggame.com
|
www.game-made-in-china.com
|
sales@hominggame.com
5
Disconnect the one connector.
10
FIG. 10-3j
6
Loosen the two hexagon socket screws fixing the gears in
place and remove the gears. The gears will be used in the
replacement volume.
HEXAGON SOCKET SCREW (2)
M3x4
WIRE
COLOR OF
POT.
3 2
1 1 = RED
2 = BK/W
3 = BK
FIG. 10-3k
7
8
Remove the hexagon nuts attaching the volume bracket upper to the volume and remove it from the bracket.
The bracket will be used with the replacement part.
The wire attached to the volume will be used with the replacement part. Remove the old heat shrink tubing attached to the wire using
the nippers or cutters.
9
Use the soldering iron to melt the solder and remove the wire from the old volume. You must take the utmost care when using the
soldering iron.
10
11
12
13
14
If the lead wire on the end of the wire terminal is less than five millimeters use wire strippers or cutters to peal back the covering.
Pass the wire through each of the heat shrink tubes. Solder the wire terminal to the replacement volume.
Use the wiring diagram to make sure you don’t solder in the wrong place.
Use the industrial dryer to apply heat and attach the heat shrink tubing to the soldered area. Attach the gears and bracket to the volume.
Connect the connector.
As in the above adjustment method, with the Control Unit level, engage the gears with the D cut face of the volume axis in the direc-
tion shown in the diagram and attach it to the Control Unit. (See FIG. 11-3e).
Fix the bracket in place with the two screws. Reattach the Gun Cover and the muzzle Reattach the Control Unit to the cabinet. Turn on
the power and use the calibration screen to alter the volume values.
34