English
www.homeright.com
8
Sprayer Setup
2
1
3
4
Squeeze a small amount of oil (included,
3-in-One
®
oil or similar) into the pick-up tube
port and the return port. Plug in sprayer and
squeeze trigger 3-5 seconds to lubricate piston
with oil.
Remove container and pick-up tube.
Use the correct spray tip for the material being
sprayed. (See page 10.) Check spray tip and
atomized valve for wear before each use. Insert
atomizer valve and securely screw on spray tip.
Insert pick-up tube into cylinder housing.
5
6
Fill container with paint/stain, and thin if
needed. We recommend thinning exterior latex
paint 5-8%. About 6-10 oz per gallon.
Screw container to cylinder housing and plug
in sprayer.
7
8
Attach flexible extension between cylinder
housing and spray tip. The flexible extension
uses its own atomizer valve as well as the
longer atomizer valve. Flexible extension is not
necessary when using suction tube.
Bend the flexible extension as required for
the project. Use the suction tube to paint at
any angle, straight up or straight down, great
for floors and ceilings. See page 11 for more
information.
Using the Optional
Flexible Extension
The flexible extension can be
bent at any angle to make
spraying hard to reach areas
easier to spray. Using the
flexible extension will prevent
tilting the sprayer.
When using the flexible
extension, two atomizer
valves must be used. The
longer atomizer valve must be
between the cylinder housing
and flexible extension, and the
shorter atomizer valve must be
between the flexible extension
and spray tip.
Short
Atomizer
Long
Atomizer
C820425D.f_MAN_Pro50-55_EN-FR-ES.indd 8
8/15/11 10:41 AM
