HomeMatic HmIP-SRD, Инструкция по монтажу и руководство по эксплуатации

Страница: 45 / 53

45
Start-up
the bracket) ( see figure 11 ). Depending on the
condition of the surface you can choose between
four screw holes.
• Drill the marked holes ( see fig. 11 ).
If you are working with a stone wall, drill the
marked two 5 mm holes and insert the plugs
supplied. If you are using a wooden wall, you can
pre-drill 1.5 mm holes to make screws easier to
insert.
• Use the supplied screws and plugs to fasten the
mounting bracket (see figure 12 or 13) .
• If necessary, lead the cable of the power supply
unit through the cable opening of the mounting
bracket.
• Place the device first on the upper and then on
the lower lugs of the mounted wall bracket until
it is fully engaged (
see figure 12 or 13 ).
5.4.2 Mounting on a round object
To attach the rain sensor to a round object (e.g. a stainless
steel pipe), you can use the 45 degree bracket
(F) and the
included cable ties.
• Lead the cable ties trough the openings provided
in the 45 degree bracket ( see figure 14 ).
• Hold the bracket to the object to which you want
to attach it.