HomeMatic HmIP-SRD, Инструкция по монтажу и руководство по эксплуатации

Страница: 42 / 53

42
Start-up
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(B) shortly (see figure 10) .
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Wait until the connection is completed.
• If connection of the device was successful, the
LED (B) lights up green (see figure 10) . The device
is now ready for use.
• If the LED lights up red, please try again.
• In the app, give the device a name and allocate
it to a room.
5.4 Notes on installation
The device must be mounted in such a way that it
cannot fall down or cause damage.
Do not install the device so that it is the highest
point in an outdoor area (e.g. on buildings or
masts). This creates a risk of lightning strikes.
When installing the device on buildings, lightning
protection regulations must be observed.