56
All you have to do to integrate a new wireless
smoke detector into an existing wireless network
is teach it in to a wireless smoke detector that is
already part of that network.
To remove a wireless smoke detector from a
wireless network, it must be reset to the initial
state. It can then be integrated into a different
wireless network or it can be taught-in to another
wireless smoke detector that is also in the initial
state to form a new wireless network.
8.2 Teaching-in wireless smoke detectors
to other HomeMatic components
A network of wireless smoke detectors can serve
as a sensor for a HomeMatic actuator. For this to
work, the actuator (for switching a lamp on/off, for
example) must be taught-in to a wireless smoke
detector in the network. To execute the teach-in
procedure, both of the devices to be connected
must be in teach-in mode. To switch the wireless
smoke detector to teach-in mode, briefly press
the wireless module button. The wireless module
LED flashes orange. If no teach-in is carried out,
teach-in mode will be exited automatically after
20 seconds.
Содержание HM-Sec-SD
Страница 37: ...37 ...
