50
Errors and information indicated by the device LED
the battery has been allowed a brief recovery period.
If you are using weak batteries, the device may perform
a restart automatically when you press a button. The
device LED then briefly flashes red, green and orange,
and follow this with 5 brief red flashes to indicate that
the batteries are weak.
7.3
Command not confirmed
If a receiver (at least one in cases where multiple de-
vices have been taught-in) does not confirm a com
-
mand, the device LED lights up red at the end of the
transmission process. This behaviour may be caused
by the following:
•
The receiver cannot be accessed.
•
The receiver is unable to execute the command
(load failure, mechanical blockade, etc.).
•
The receiver is defective.
7.4 Duty cycle exceeded
The duty cycle is a legally regulated limit of the trans-
mission time of devices in the 868 MHz range. The aim
of this regulation is to safeguard the operation of all de-
vices working in the 868 MHz range.
In the 868 MHz frequency range we use, the maximum
transmission time of any device is 1% of an hour (i.e. 36
seconds in an hour). Devices must cease transmission
