40
Start-up
C
M
Y
CM
MY
CY
CMY
K
• The remote control is now in configuration mode.
The device LED flashes green to indicate this. (To
exit configuration mode, briefly press the teach-in
button again.)
•
To enter teach-in mode, press the remote control
button in to which you wish to teach a function. The
device LED flashes orange slowly. (Provided the
device to be taught-in is not yet in teach-in mode,
you can cancel teach-in mode on the remote control
by pressing the teach-in button again briefly. The
device LED then lights up red.)
•
Now put the device in to which you wish to teach the
remote control into teach-in mode by following the
relevant operating manual instructions.
• If both devices are in teach-in mode, the LED flash
-
es orange quickly to indicate this.
The device LED lights up green to indicate that teach-
ing-in has been successful.
