43
Start-up
mode of your remote control. Therefore, remove the
cover and briefly press the teach-in button (G) of
your remote control with a pointed object.
C
M
Y
CM
MY
CY
CMY
K
• The remote control is now in configuration mode.
The device LED flashes green to indicate this. (To
exit configuration mode, briefly press the teach-in
button again.)
•
As soon as communication between the remote
control and the central control unit has been estab-
lished, the device LED flashes orange. The device
LED lights up green to indicate that teaching-in has
been successful.
•
After a short time, the newly taught-in device ap-
pears in the inbox of your software interface. The
button "Inbox (x new devices)" indicates how many
new devices have been taught-in successfully.
•
If required, you can teach-in additional devices by
repeating the steps described above for each de-
vice.
