49
Errors and information indicated by the device LED
1 s lighting up
green
Teach-in suc-
cessful
You can continue
with operation.
2 s lighting
up red
Teach-in failed
Try again.
Slow green
flashing and
red light if but-
ton is pressed
Remote control
has already been
taught-in to a
central control unit
and is therefore
blocked for direct
teach-in
see „5.2.1
Teaching-in directly
in to HomeMatic
devices“ on page
39
Slow red
flashing
Stage before
resetting to factory
settings
Device is waiting
for teach-in button
to be pressed and
held in order to
carry out a reset, or
for a short button
press to cancel the
process.
Fast red
flashing
Teach-in button
has been pressed
long to perform
factory reset
Factory settings are
restored if teach-in
button is released
7.2 Weak batteries
Provided that the voltage value permits it, the remote
control will remain ready for operation also if the battery
voltage is low. Depending on the particular load, it may
be possible to send transmissions again repeatedly, once
