45
6.3.2 Screw mounting
• Choose a site for installation.
• Make sure that electrical lines in the wall will not
be damaged.
• Position the mounting plate on the desired site on
the wall. Make sure that the arrow on the mounting
plate is pointing upwards.
• Use a pen to mark the positions of 2 bore holes
A
(diagonally opposite) in the mounting plate on the
wall. The bore holes
B
can be used for installation
with a flush-mounting box..
B
B
B
A
A
B
• If you are working with a stone wall, drill the mar-
ked two 5 mm holes and insert the plugs supplied.
If you are working with a wooden wall, you can
pre-drill 1.5 mm holes to make screws easier to
insert.
