HomeMatic 156757, Инструкция по установке и эксплуатации

Страница: 36 / 54

36
Hazard information
The actuator is part of the building installation.
Observe the relevant national standards and di-
rectives during planning and set-up. The device
has been designed solely for operation on a 230
V / 50 Hz AC supply. Only qualified electricians (to
VDE 0100) are permitted to carry out work on the
230 V mains. The applicable accident prevention
regulations must be observed while such work is
being carried out. To avoid electric shocks from
the device, please disconnect the mains voltage
(trip the miniature circuit-breaker). Non-compli-
ance with the installation instructions can cause
fire or introduce other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Loads connected to the relay outputs require suf-
ficient insulation.
Please take the technical data (in particular the
maximum permissible switching capacity of the
relay and the type of load to be connected) into
account before connecting the load. Do not ex-
ceed the capacity specified for the device.