HomeMatic 156757, Инструкция по установке и эксплуатации

Страница: 44 / 54

44
Start-up
switching actuator ( see figure 7 ).
• Insert the rocker into the frame ( see figure 8 ).
• Switch the circuit breaker of the power circuit
back on again.
• The switch actuator is now ready for operation
and can be connected to the Homematic IP Ac-
cess Point (see „6.4 Pairing“ on page 44).
6.4 Pairing
Please read this entire section before starting
the pairing procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU3. For detailed information, please refer to the
Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the device into your system and enable it
to communicate with other Homematic IP devices, you
must first add the device to your Homematic IP Access
Point.