Homematic IP HmIPW-FALMOT-C12, Инструкция по установке и эксплуатации

Страница: 54 / 80

54
Start-up
figure 3) .
• Use an appropriate drill to make the 6 mm holes
as illustrated (see figure 3 .
• Insert the supplied plugs and screws into the drill
holes ( see figure 4 ). Allow the screws to protrude
5,5 mm.
• Attach the floor heating controller using the
screw holes on the screw heads ( see figure 5 ).
5.2 DIN rail mount
For mounting the floor heating controller to a DIN rail,
please proceed as follows:
• Place the floor heating controller onto the DIN
rail ( see figure 6 ).
• Latch the floor heating controller by pressing the
spring latches (F) upwards ( see figure 7 ).
• Make sure that the spring latches are completely
latched and that the device is seated solidly on
the rail.
6 Start-up
6.1 Installation instructions
Before installing and setting up the device, you
have to put a Homematic IP Wired Access Point
(HmIPW-DRAP) into operation first.