Homematic IP HmIPW-DRI32, Инструкция по установке и эксплуатации

Страница: 44 / 55

44
Start-up
activate the teach-in mode of the device (see „5.4
Teaching-in“ on page 44).
After installation and before connecting the device
to the app, simple operating functions (e.g. for test
purposes) are available directly on the device („6
Operation“ on page 49).
5.4 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First, set up your Homematic IP Wired Access
Point to enable operation of other Homematic IP
Wired devices within your system. For further in-
formation, please refer to the operating manual
of the Wired Access Point.
To integrate the input module into your system and
enable it to communicate with other Homematic IP
Wired devices, you must teach it in first.
You can connect the input module to the Central Control
Unit CCU3 for local configuration via PC.
As an alternative, connect the device to the Homematic IP
cloud for flexible control via smartphone app. You can
• control the wired system via smartphone app
using the Homematic IP Wired Access Point
(HmIPW-DRAP) or