48
Mounting
tions provided by the system in combination with other
components are described in the Homematic IP User
Guide. All current technical documents and updates are
provided at www.eQ-3.com.
5
Mounting
You can flexibly mount the floor heating actuator to a
wall using the supplied screws or to a DIN rail.
5.1
Screw mounting
For mounting the floor heating actuator using screws,
please proceed as follows:
• Please select a suitable mounting location close
to your heating manifold.
Make sure that no electricity or similar lines run in
the wall at this location!
• Use a pen to mark the positions of the two bore
holes with a distance of 120 mm on the wall
(see
figure 3)
.
• Use a suitable bit to drill the 6 mm holes as il-
lustrated.
• Use the supplied screws and plugs to fasten the
floor heating actuator
(see figure 3)
.
Содержание HmIP-FALMOT-C12
Страница 3: ...1 A B G E D C F I H J 1 2 3 4 5 6 7 8 9 10 11 12 ...
Страница 4: ...2 3 120 mm K L N M ...
Страница 5: ...4 5 ...
Страница 6: ...6 7 Channeltaste drücken Selecttaste drücken press channel button press select button ...
